Single Pan gas freestanding fryers

The FastFri FF18 is an impressive and economical new 18-litre gas fryer. It can be easily incorporated as part of a new kitchen or, thanks to its small footprint 400mm width, can also easily be used to replace an existing fryer. As well as being economically priced, the FastFri FF18 is fuel efficient so it helps business owners reduce their day-to-day operating expenses.

400mm single pan gas fryer
Unit includes natural gas and LPG regulator
Stainless steel open tank with cool zone
Stainless steel exterior front and sides
Double skin door with stainless steel outer
50mm diameter stainless steel adjusable legs
Two nickel plated wire baskets
Stainless steel lid supplied as standard
100-190°C mechanical thermostat
Over temperature safety cut out
Manual ignition pilot burner with flame failure
Open stainless steel pan for easy clean
30mm drain valve for effective draining
Lift off basket hanger
Access to all parts from front of unit
400mm single pan gas fryer
18 litre oil capacity
Multi-jet target burner
Typical output : 25kg of chips / hour
Gas loading: 25kW (3/4" BSP Male)
400mm x 735mm x 915mm (1085mm to top of splashback)
One year parts and labour warranty

Welded tank with an extra smooth peened finish ensures easy cleaning
Long lasting, high temperature alloy stainless steel heat baffles are mounted in the heat exchanger tubes to provide maximum heating and combustion
Standing pilot light design provides a ready flame when heat is required
Stainless steel front, door, sides and splash back
Solstice burner/baffle design
Thermostat maintains selected temperature automatically between 200°F (93°C) and 400°F (190°C-CE)
Integrated gas control valve acts as a manual and pilot valve, automatic pilot valve, gas filter, pressure regulator, and automatic main valve
Gas control valve prevents gas flow to the main burner until pilot is established and shuts off all gas flow automatically if the pilot flame goes out
Temperature limit switch safely shuts off all gas flow if the fryer temperature exceeds the upper limit
Oil Capacity 15.9-18.1 litres
Gas Rating: 20.5kW (70,000 btu/hr)
397mm x 813mm x 1200mm (working height 864mm)
One year parts and labour warranty

400mm single pan gas fryer
18 litre oil capacity
85,303 Btu/hr multi-jet target burner
Mechanical thermostat
Manual pilot ignition
Stainless steel finish
Adjustable front feet and rear rollers
Two baskets and stainless steel lid supplied
Gas loading: 25kW (85,303 BTU)
400mm x 800mm x 915mm (1085mm to top of splashback)
One year parts and labour warranty

Front mounted controls
Pilot flame operation - with piezo ignition
Sturdy rigid basket support
High quality grade 304 stainless steel fryer tanks, fully welded to hobs
Internal drain taps with straight drain pipe
Cool zone collects cooking debris
Thermostatic control with fail safe top temperature cut out and flame failure device
Supplied with: heavy duty double nickel plated spun wire basket, fryer batter plates, stainless steel lids, oil drain bucket
Typical output: 23kg of chips / hour (Chilled)
Oil capacity: 12 litres
Gas rating: 11.4kW
300mm x 600mm x 900mm (hob height)
Two years parts and labour warranty

This unit forms part of the LINCAT SILVERLINK 600 range of modular cooking equipment

The RFG16 is a powerful single tank, 16ltr, fryer. It’s ideal for fresh or frozen chips (30kg/h fresh output)
Includes slotted fish plate
Safety tap for easy oil drainage
Hinged control panel for direct maintenance access
Heat resistant basket handle
Piezo ignition
Basket size: 250mm x 300mm x 145mm
Output: 30kg per hour
Gas rating: 12.6kW (47,796 btu/h)
400mm x 600mm x 1055mm
Two years parts and labour warranty

This product is supplied as LPG with jets to convert to natural gas as standard

High efficiency cast iron burners have a large heat transfer area
Tubes are constructed of heavy gauge metal with a built-in deflector system
105,000 BTU (31 KW) total output
Millivolt temperature control circuit
Snap acting thermostat has a 200° F - 400° F (93° C-204° C) temperature range
Fast recovery to desired temperature
Heats oil quickly producing a better tasting product with less oil absorption
100% safety shut-off
Large cool zone, captures and holds particles below the tubes, out of the fry zone
Frying area is 14" x 14" (356 x 356 mm)
Frypot tubes and sides are robotically welded stainless steel to eliminate leaks
Fine mesh wire crumb is included
Recessed bottom facilitates draining, slants toward the drain
1-1/4" (32 mm) full port drain valve empties frypot quickly and safely
Two large, nickel-plated fry baskets with vinyl coated, heat protection, handles are included
Basket hangers are stainless steel
Stainless steel front, door, sides, basket hanger and frypot
Welded and polished stainless steel seams
Full heat shield protects control panel
Plate mounted 6" (152 mm) heavy duty stainless steel legs
Oil Capacity 22 litres
Gas Rating: 31kW
395mm x 775mm x 914mm (working height, 1162mm to splashback)
One year parts and labour warranty

Please contact us for pricing on Imperial Equipment

Mechanical Thermostat
4 Powerful burners
Stainless steel front, door, side and flue
Stainless steel tank
40kg (88lb) production (fries per hour)
Supplied with two oblong baskets
Oil Capacity 17.1 - 21.5 litres
Gas Rating: 33kW (110,000 btu/hr)
397mm x 864mm x 1198mm (working height 870mm)
One year parts and labour warranty

Castors available on request

Open pot burners - Flame heats ceramic plates located strategically outside of the frypot
Intense heat rapidly heats the stainless steel sides and the oil inside of the frypot
No tube fired burners and no air shutter adjustments needed
Snap acting thermostat has a 200ºF - 400ºF. (93ºC - 204ºC) temperature range that extends oil life and produces a uniformly cooked product
100% safety shut-off valve
Large cold zone - captures and holds particles out of the fry zone
Open Pot Frypots are easy to clean with no obstruction to clean around
Large 14" x 14" (356 x 356 mm) frying area
Frypot sides are robotically welded stainless steel to eliminate leaks
Fine mesh wire crumb is included
Deep drawn bottom facilitates draining, slants toward the drain
1-1/4" (32 mm) full port drain valve empties frypot quickly and safely
Two large, nickel-plated fry baskets with vinyl coated, heat protection, handles are included
Basket hangers are stainless steel
Stainless steel front, door, sides, basket hanger and frypot
Welded and polished stainless steel seams
Full heat shield protects control panel
Full bottom chassis provide structural support
Plate mounted 6" (152 mm) heavy duty stainless steel legs
Oil Capacity: 22 litres
Gas Rating: 31kW
394mm x 775mm x 914mm (working height, 1162mm to splashback)
One year parts and labour warranty

Please contact us for pricing on Imperial Equipment

300mm single tank gas fryer
Oil drainage through the body of the fryer
Accurate thermostatic control up to 190°C for consistent results and safe operation
High energy efficiency
Convenient piezo ignition
Externally fired heating gives easy access for cleaning tanks
No electric supply required
For safety and stability supplied with front legs and rear castors
Supplied with batter plates, baskets, full lids and stainless steel bucket
Sits flush to wall, recess for services
Permanent laser etched markings on facia and knobs
Oil capacity: 14 litres
Gas rating: 16kW (54,594 BTU/hr)
300mm x 800mm x 1020mm (900mm to pan)
Two years parts and labour warranty

High efficiency cast iron burners have a large heat transfer area
Tubes are constructed of heavy gauge metal with a built-in deflector system
140,000 BTU (41 KW) total output
Millivolt temperature control circuit
Snap acting thermostat has a 200° F - 400° F (93° C-204° C) temperature range
Fast recovery to desired temperature
Heats oil quickly producing a better tasting product with less oil absorption
100% safety shut-off
Large cool zone, captures and holds particles below the tubes, out of the fry zone
Frying area is 14" x 14" (356 x 356 mm)
Frypot tubes and sides are robotically welded stainless steel to eliminate leaks
Fine mesh wire crumb is included
Recessed bottom facilitates draining, slants toward the drain
1-1/4" (32 mm) full port drain valve empties frypot quickly and safely
Two large, nickel-plated fry baskets with vinyl coated, heat protection, handles are included
Basket hangers are stainless steel
Stainless steel front, door, sides, basket hanger and frypot
Welded and polished stainless steel seams
Full heat shield protects control panel
Plate mounted 6" (152 mm) heavy duty stainless steel legs
Oil Capacity 27 litres
Gas Rating: 41kW
395mm x 775mm x 914mm (working height, 1162mm to splashback)
One year parts and labour warranty

Please contact us for pricing on Imperial Equipment

450mm single pan gas fryer
2 x 12.5kW infrared burners
Mechanical or electronic controls
Easy clean, installation and service
Supplied with 2 standard baskets
Output: 31kg/hr
Oil capacity: 20 litre
Gas rating: 25kW
450mm x 812mm x 1085mm
One year parts and labour warranty

400mm single tank gas fryer
Oil drainage through the body of the fryer
Accurate thermostatic control up to 190°C for consistent results and safe operation
High energy efficiency
Convenient piezo ignition
Externally fired heating gives easy access for cleaning tanks
No electric supply required
For safety and stability supplied with front legs and rear castors
Supplied with batter plates, baskets, full lids and stainless steel bucket
Sits flush to wall, recess for services
Permanent laser etched markings on facia and knobs
Oil capacity: 16 litres
Gas rating: 23kW (78,479 BTU/hr)
400mm x 800mm x 1020mm (900mm to pan)
Two years parts and labour warranty

Image shows model with one large basket (available below). Unit is supplied with two 1/2 size baskets as standard.