Catering Water Plumbing Accessories

Food waste strainer for commercial sinks
Unique sink strainer system designed and manufactured by Mechline to make it easier for kitchen staff to prevent food waste particles from entering the drainage system via the sink drain boss
Patent pending
Simple to use: Rinse the food waste particles into the basket, Empty out the food waste into the bin, Replace the basket to keep the sink clean and clear
Designed to fit sink bowls between 580mm-610mm wide x 430mm-460mm deep
Can be fitted with drains to the left or right using the provided cover plates
Raised angle of the front edge encourages food wasteto the basket
Manufactured from 1mm thick 304 grade stainless steel
Helps to prolong service intervals between grewase traps
Complete system is easy to remove and replace to allow periodic cleaning through the dishwasher
Base height is 55mm up from the bottom of the sink bowl

Sink plug upstand
250mm high
Fits standard 40mm (1-1/2") sink drains

Sink plug upstand
300mm high
Fits standard 40mm (1-1/2") sink drains

WRAS approved braided stainless steel (AISI 304) tap hose
For hot or cold water, to sanitary fittings, pumps, catering equipment, air conditioning, sink taps, heating or between rigid pipework
1/2" x 15mm
10mm bore size
300mm long

WRAS approved braided stainless steel (AISI 304) tap hose
For hot or cold water, to sanitary fittings, pumps, catering equipment, air conditioning, sink taps, heating or between rigid pipework
1/2" x 15mm
10mm bore size
500mm long

WRAS approved braided stainless steel (AISI 304) tap hose
PEX lined version
For hot or cold water, to sanitary fittings, pumps, catering equipment, air conditioning, sink taps, heating or between rigid pipework
1/2" x 15mm
10mm bore size
500mm long

15mm x 1/2" x 500mm Flexible Tap Connector With 90 Degree Elbow
Suitable for use on both hot and cold taps
Most commonly used on sinks and basin
Being made of brass they are durable and reliable

WRAS approved braided stainless steel (AISI 304) tap hose with push fit connection
For hot or cold water, to sanitary fittings, pumps, catering equipment, air conditioning, sink taps, heating or between rigid pipework
1/2" x 15mm (Push fit)
10mm bore size
300mm long

WRAS approved braided stainless steel (AISI 304) tap hose with push fit connection
For hot or cold water, to sanitary fittings, pumps, catering equipment, air conditioning, sink taps, heating or between rigid pipework
3/4" x 22mm
10mm bore size
500mm long

WRAS approved braided stainless steel (AISI 304) tap hose with push fit connection and isolation valve
For hot or cold water, to sanitary fittings, pumps, catering equipment, air conditioning, sink taps, heating or between rigid pipework
Length: 500mm
Bore size: 13mm
Connections: 1/2" x 15mm

¾" elbow x ¾" straight
Colour: blue
2500mm length

EDPM Stainless Steel Braided Connection Hose
3/4" 90° Elbow F/Faced x 3/4" Female F/Faced
10mm Bore x 1000mm long
WRAS Approved braided hose with nickel plated brass fittings
For hot and cold water -15 to +70°C and pressure if 10bar at 20°C