Catering Pre-Rinse Sprays

Single pedestal, single water feed deck mounted pre-rinse spray
AquaJet is a fully assembled pre-rinse spray which has been factory pressure and flow-tested to guarantee performance and minimise installation time
WRAS approved
Super strong, food-grade, high-flow water hose
Pre-assembled, ready-to-install - saves time on site.
Factory tested for Quality Assurance to 6 bar
Complete spares available, fitting most brands of pre-rinses on the market
Restraining device available (AJ PR RS) to prevent hose from overstretching into basin - helps meet Water Board regs & reduce abuse
Guaranteed against manufacturing defects
Extra long 300mm wall bracket can be shortened to a perfect fit avoiding the typical on-site problems of extending a short bracket
1050mm high (add 150mm where bowl filler used)
1 x 1/2" connection
Single 25mm diameter tap hole required

Single pedestal, twin water feed deck mounted pre-rinse spray
AquaJet is a fully assembled pre-rinse spray which has been factory pressure and flow-tested to guarantee performance and minimise installation time
WRAS approved
Super strong, food-grade, high-flow water hose
Pre-assembled, ready-to-install - saves time on site.
Factory tested for Quality Assurance to 6 bar
Complete spares available, fitting most brands of pre-rinses on the market
Restraining device available (AJ PR RS) to prevent hose from overstretching into basin - helps meet Water Board regs & reduce abuse
Guaranteed against manufacturing defects
Extra long 300mm wall bracket can be shortened to a perfect fit avoiding the typical on-site problems of extending a short bracket
1050mm high (add 150mm where bowl filler used)
2 x 1/2" connection
Single 30mm diameter tap hole required

Twin pedestal, twin water feed deck mounted pre-rinse spray
AquaJet is a fully assembled pre-rinse spray which has been factory pressure and flow-tested to guarantee performance and minimise installation time
WRAS approved
Super strong, food-grade, high-flow water hose
Pre-assembled, ready-to-install - saves time on site.
Factory tested for Quality Assurance to 6 bar
Complete spares available, fitting most brands of pre-rinses on the market
Restraining device available (AJ PR RS) to prevent hose from overstretching into basin - helps meet Water Board regs & reduce abuse
Guaranteed against manufacturing defects
Extra long 300mm wall bracket can be shortened to a perfect fit avoiding the typical on-site problems of extending a short bracket
1050mm high (add 150mm where bowl filler used)
2 x 1/2" connection
Two 25mm diameter tap holes required

Heavy-Duty "Mis-Use Resistant" wall mounted pre-rinse spray
Designed for single water feed (usually cold water supply), the AquaJet 50 can be fitted with an optional mixing valve to provide a tempered, mixed water supply
Can be used as pre-rinse for dirty dishes or food washing and rinsing applications (when connected to potable water source)
Pre-assembled & tested for quick installation
Easy to clean and service
Integral restraining cable prevents overstretching and spray gun contact with dish water
Coiled hose absorbs the wear and tear from twisting the gun
Wall-mounting keeps the sink deck clear
Big bore delivery hose produces excellent spray pattern
Save up to an additional 25% in water when fitted with water-saving face plate option (select model AJ-PR-50W)

Deck mounted AquaTechnix 30 Pre-Rinse Spray
Twin pedestal
Twin water feed
300mm bowl filler tap with dome control
Ergonomic in design and functionality
PosiStop™ patented built-in stopping device which prevents the lever or handle from being turned or knocked too far and transferring stress to the tap valve
Modern, hygienic and practical design comes pre-assembled ready to install
Heavy-duty construction incorporating high quality tested and proven components for commerical use
WRAS approved
1/2" connections at 180mm centres
Water pressure range: 1.5 - 5 bar
Height: 1187mm

Replacement Spray Gun (Single Complete With 1 Hose Washer) for AquaTechnix pre rinse sprays