Machined Steel / Cast Iron Plate Gas Griddles

built around a sturdy cast iron plate giving a solid cooking platform for cooking burgers sausages bacon fried eggs etc.
Smooth cast plate gives direct heat transfer to your food making the cooking process quicker and healthier
Integral wall on the sides and rear of the plate gives a secure area to cook and hold your food
6 point star burner is designed give even heat across the plate so there are no cold spots
Piezo ignition system
Front drainage tray
Cooking area: 400mm x 400mm
Temperature range: 40 - 300°C
Gas rating: 2.35kW (8840 btu/h)
400mm x 475mm x 230mm
Two years parts and labour warranty

This product is supplied as LPG with jets to convert to natural gas as standard

The steel plate of the gas griddle PSR 400 G is 10 mm thick. With a temperature rise of less than 10 minutes the decarbonised steel plate is of sufficient thickness to sear meat, fish and vegetables, providing a good contact cooking for a direct heat transfer to the food to be cooked.
The griddle plate is equipped with a double piezo ignition and two adjustment knobs
The even temperature over the entire cooking surface is due to two gas burners. Both star-shaped burners cover the entire surface of the steel plate
Thanks to the independent control of the 2 cooking zones, you can alternate and vary the cooking on the 400 mm wide plate.
It is equipped with two safety thermocouples: in the event of a malfunction or gas leak, the thermocouple automatically stops the steel plate for safety.
The juices and grease are drained into the fully removable drawer which can be cleaned in a dishwasher. After intensive use and after disconnecting the professional griddle plate, it is possible to deglaze the still hot cooking plate with cold water or some ice cubes
Cooking area: 400mm x 400mm
Gas rating: 2.71kW (10295 btu/h)
400mm x 475mm x 230mm
Two years parts and labour warranty

This product is supplied as LPG with jets to convert to natural gas as standard

The steel plate of the gas griddle PSR 400 G is 10 mm thick. With a temperature rise of less than 10 minutes the decarbonised steel plate is of sufficient thickness to sear meat, fish and vegetables, providing a good contact cooking for a direct heat transfer to the food to be cooked.
The griddle plate is equipped with a double piezo ignition and two adjustment knobs
The even temperature over the entire cooking surface is due to two gas burners. Both star-shaped burners cover the entire surface of the steel plate
Thanks to the independent control of the 2 cooking zones, you can alternate and vary the cooking on the 400 mm wide plate.
It is equipped with two safety thermocouples: in the event of a malfunction or gas leak, the thermocouple automatically stops the steel plate for safety.
The juices and grease are drained into the fully removable drawer which can be cleaned in a dishwasher. After intensive use and after disconnecting the professional griddle plate, it is possible to deglaze the still hot cooking plate with cold water or some ice cubes
Cooking area: 600mm x 400mm
Gas rating: 5kW (21850 btu/h)
600mm x 475mm x 230mm
Two years parts and labour warranty

This product is supplied as LPG with jets to convert to natural gas as standard

built around a sturdy cast iron plate giving a solid cooking platform for cooking burgers sausages bacon fried eggs etc.
Smooth cast plate gives direct heat transfer to your food making the cooking process quicker and healthier
Integral wall on the sides and rear of the plate gives a secure area to cook and hold your food
6 point star burner is designed give even heat across the plate so there are no cold spots
Piezo ignition system
Front drainage tray
Cooking area: 600mm x 400mm
Temperature range: 40 - 300°C
Gas rating: 4.7kW (17680 btu/h)
600mm x 475mm x 230mm
Two years parts and labour warranty

Please note images shows 400mm model

This product is supplied as LPG with jets to convert to natural gas as standard

Solid 12mm thick machined steel plate ensures even heat distribution and excellent heat retention
2mm thick, 40mm high integral splashguard
Fully-welded plates eliminates dirt traps
Large fat collection drawer, removable for easy cleaning
Fat drainage channel keeps surfaces free from grease
High and low heat settings for controlled cooking
Flame failure device
Piezo ignition
Gas rating: 4.9kW
450mm x 600mm x 415mm
Two years parts and labour warranty

This unit forms part of the LINCAT SILVERLINK 600 range of modular cooking equipment. Requires counter top or Silverlink base units to support

The steel plate of the gas griddle PSR 400 G is 10 mm thick. With a temperature rise of less than 10 minutes the decarbonised steel plate is of sufficient thickness to sear meat, fish and vegetables, providing a good contact cooking for a direct heat transfer to the food to be cooked.
The griddle plate is equipped with a double piezo ignition and two adjustment knobs
The even temperature over the entire cooking surface is due to two gas burners. Both star-shaped burners cover the entire surface of the steel plate
Thanks to the independent control of the 2 cooking zones, you can alternate and vary the cooking on the 400 mm wide plate.
It is equipped with two safety thermocouples: in the event of a malfunction or gas leak, the thermocouple automatically stops the steel plate for safety.
The juices and grease are drained into the fully removable drawer which can be cleaned in a dishwasher. After intensive use and after disconnecting the professional griddle plate, it is possible to deglaze the still hot cooking plate with cold water or some ice cubes
Cooking area: 900mm x 400mm
Gas rating: 8.65kW (32775 btu/h)
900mm x 475mm x 230mm
Two years parts and labour warranty

This product is supplied as LPG with jets to convert to natural gas as standard

Solid 12mm thick machined steel plate ensures even heat distribution and excellent heat retention
2mm thick, 40mm high integral splashguard
Fully-welded plates eliminates dirt traps
Large fat collection drawer, removable for easy cleaning
Fat drainage channel keeps surfaces free from grease
High and low heat settings for controlled cooking
Flame failure device
Piezo ignition
Gas rating: 7kW
750mm x 600mm x 415mm
Two years parts and labour warranty

This unit forms part of the LINCAT SILVERLINK 600 range of modular cooking equipment. Requires counter top or Silverlink base units to support

Half-ribbed to give attractive branding marks
Solid 12mm thick machined steel plate ensures even heat distribution and excellent heat retention
2mm thick, 40mm high integral splashguard
Fully-welded plates eliminates dirt traps
Large fat collection drawer, removable for easy cleaning
Fat drainage channel keeps surfaces free from grease
High and low heat settings for controlled cooking
Flame failure device
Piezo ignition
Gas rating: 7kW
750mm x 600mm x 415mm
Two years parts and labour warranty

This unit forms part of the LINCAT SILVERLINK 600 range of modular cooking equipment. Requires counter top or Silverlink base units to support

Heavy duty 304 grade stainless steel finish
2 x 5.5kW burners
Variable heat dual gas controls
12mm thick machine finished mild steel griddle plate
5 position toasting rack
Full width grease trough and removable collection tray
Flame failure protection
Open cabinet base for extra storage
Feet at front with rear castors
Gas loading: 11kW (85,380 BTU)
600mm x 800mm x 915mm (1085mm to top of flue)
One year parts and labour warranty

18mm thick smooth polished steel griddle plate
Thermostatically-controlled 8.2kW burner
Plate is completely surrounded by a grease trough
Removable grease collection area
Supplied on adjustable feet
2mm thick 304 culinary grade stainless steel construction provide robustness and longevity
Temperature range: 100 - 300°C
Cooking area: 260mm x 640mm
Gas rating: 8.2kW (27,978btu/hr)
400mm x 900mm x 350mm
Two years parts and labour warranty

This unit forms part of the Falcon F900 range of modular cooking equipment. Requires counter top or F900 base units to support.

Further accessories are available for the F900 range. Please contact us for further details.

Highly polished smooth steel griddle plate (18mm thick)
Thermostatically controlled
Full height surround
High performance burner
Individual piezo ignition to burner
Integral, large capacity grease jug
Supplied on adjustable feet
Laser etched control icons
Temperature range: 140 - 300°C
Cooking area: 395mm x 485mm
½" BSP gas inlet
Gas rating : 5.3kW (19,900 btu/hr)
400mm x 770mm x 455mm (890mm on stand)
Two years parts and labour warranty

Highly polished ribbed steel griddle plate (18mm thick)
Thermostatically controlled
Full height surround
High performance burner
Individual piezo ignition to burner
Integral, large capacity grease jug
Supplied on adjustable feet
Laser etched control icons
Temperature range: 140 - 300°C
Cooking area: 395mm x 485mm
½" BSP gas inlet
Gas rating : 5.3kW (19,900 btu/hr)
400mm x 770mm x 455mm (890mm on stand)
Two years parts and labour warranty

Maximised cooking area, griddle plates sit flush to the sides of the unit
Left and right independently controlled heat zones for flexibility and economy during quiet periods
Precise thermostatic control from 90°C - 280°C for consistent results and economical operation
Convenient piezo ignition and pilot burners for stand-by operation
15mm thick griddle plate
Large 2 litre collection drawer
Permanent laser etched markings on fascia and knobs
Sits flush to the wall, recess for services
Supplied on height adjustable 55-70mm legs
Includes scraper
Electrical loading: 15.5kW (52,888 Btu/hr)
600mm x 800mm x 535mm (400mm to griddle plate)
Two years parts and labour warranty

600mm gas griddle bench model
14.5kW thermostatic burner system
20mm thick griddle plate
Top weld sealed plates
Stainless steel grease drawer
Heavy-duty reinforced control knobs
Push-button piezo ignition
Adjustable feel and 2 additional rollers
Easy clean, installation and service
Temperature range: 90-300°C
Gas rating:14.5kW
600mm x 812mm x 485mm
One year parts and labour warranty

Image shows model with optional floor stand - please contact us for further information

Highly polished smooth steel griddle plate (18mm thick)
Thermostatically controlled
Full height surround
High performance burner
Individual piezo ignition to burner
Integral, large capacity grease jug
Supplied on adjustable feet
Laser etched control icons
Temperature range: 140 - 300°C
Cooking area: 595mm x 485mm
½" BSP gas inlet
Gas rating : 10.6kW (39,800 btu/hr)
600mm x 770mm x 455mm (890mm on stand)
Two years parts and labour warranty

18mm thick smooth polished steel griddle plate
Two thermostatically-controlled 8.2kW burners
Plate is completely surrounded by a grease trough
Removable grease collection area
Supplied on adjustable feet
2mm thick 304 culinary grade stainless steel construction provide robustness and longevity
Temperature range: 100 - 300°C
Cooking area: 660mm x 640mm
Gas rating: 16.4kW (55,956btu/hr)
800mm x 900mm x 350mm
Two years parts and labour warranty

This unit forms part of the Falcon F900 range of modular cooking equipment. Requires counter top or F900 base units to support.

Further accessories are available for the F900 range. Please contact us for further details.

Maximised cooking area, griddle plates sit flush to the sides of the unit
Left and right independently controlled heat zones for flexibility and economy during quiet periods
Precise thermostatic control from 90°C - 280°C for consistent results and economical operation
Convenient piezo ignition and pilot burners for stand-by operation
15mm thick griddle plate
Large 2 litre collection drawer
Permanent laser etched markings on fascia and knobs
Sits flush to the wall, recess for services
Supplied on height adjustable 55-70mm legs
Includes scraper
Gas rating: 23kW (78,479 Btu/hr)
900mm x 800mm x 535mm (400mm to griddle plate)
Two years parts and labour warranty

Highly polished half smooth / ribbed steel griddle plate (18mm thick)
Thermostatically controlled
Full height surround
High performance burner
Individual piezo ignition to burner
Integral, large capacity grease jug
Supplied on adjustable feet
Laser etched control icons
Temperature range: 140 - 300°C
Cooking area: 595mm x 485mm
½" BSP gas inlet
Gas rating : 10.6kW (39,800 btu/hr)
600mm x 770mm x 455mm (890mm on stand)
Two years parts and labour warranty

Thermostat maintains selected temperature during peak hours
Two separately controlled burners
Each griddle burner is rated at 30,000 BTU (9KW)
Aeration baffles between burners spread the heat evenly across the entire griddle surface
Burners are located every 12” (305 mm)
Each burner has an adjustable gas valve and continuous pilot for instant ignition
Highly polished 1” (25 mm) thick steel plate holds temperature and has a quick recovery
Full 24” (610 mm) plate depth for more cooking surface
Surface is ideal for a large range of menu items
Stainless steel grease gutter is 4” (102 mm) wide
Large 1 gal (3.8 L) capacity grease can has a weep hole to indicate when full
Stainless steel front, sides, splash guard, and ledge
Stainless steel ledge is one piece rolled for cleaning convenience
Control knobs are cast aluminum with a Valox™ heat protection grip
4” (102 mm) stainless steel legs are included
Gas Rating 18kW (60,000 BTU)
610m x 822mm x 356mm
One year parts and labour warranty

Image shows larger CITG-36 model

Please contact us for pricing on Imperial Equipment

900mm gas griddle bench model
23kW thermostatic burner system
20mm thick griddle plate
Top weld sealed plates
Stainless steel grease drawer
Heavy-duty reinforced control knobs
Push-button piezo ignition
Adjustable feel and 2 additional rollers
Easy clean, installation and service
Temperature range: 90-300°C
Gas rating: 23kW
900mm x 812mm x 485mm
One year parts and labour warranty

Image shows model with optional refrigerated base unit - please contact us for more information

Highly polished smooth steel griddle plate (18mm thick)
Thermostatically controlled
Full height surround
High performance burner
Individual piezo ignition to burner
Integral, large capacity grease jug
Supplied on adjustable feet
Laser etched control icons
Temperature range: 140 - 300°C
Cooking area: 894mm x 485mm
½" BSP gas inlet
Gas rating : 15.9kW (59,700 btu/hr)
900mm x 770mm x 455mm (890mm on stand)
Two years parts and labour warranty

Highly polished half ribbed half smooth steel griddle plate (18mm thick)
Thermostatically controlled
Full height surround
High performance burner
Individual piezo ignition to burner
Integral, large capacity grease jug
Supplied on adjustable feet
Laser etched control icons
Temperature range: 140 - 300°C
Cooking area: 894mm x 485mm
½" BSP gas inlet
Gas rating : 15.9kW (59,700 btu/hr)
900mm x 770mm x 455mm (890mm on stand)
Two years parts and labour warranty

Thermostat maintains selected temperature during peak hours
Three separately controlled burners
Each griddle burner is rated at 30,000 BTU (9KW)
Aeration baffles between burners spread the heat evenly across the entire griddle surface
Burners are located every 12” (305 mm)
Each burner has an adjustable gas valve and continuous pilot for instant ignition
Highly polished 1” (25 mm) thick steel plate holds temperature and has a quick recovery
Full 24” (610 mm) plate depth for more cooking surface
Surface is ideal for a large range of menu items
Stainless steel grease gutter is 4” (102 mm) wide
Large 1 gal (3.8 L) capacity grease can has a weep hole to indicate when full
Stainless steel front, sides, splash guard, and ledge
Stainless steel ledge is one piece rolled for cleaning convenience
Control knobs are cast aluminum with a Valox™ heat protection grip
4” (102 mm) stainless steel legs are included
Gas Rating 26kW (90,000 BTU)
914m x 822mm x 356mm
One year parts and labour warranty

Please contact us for pricing on Imperial Equipment

1200mm gas griddle bench model
31kW thermostatic burner system
20mm thick griddle plate
Top weld sealed plates
Stainless steel grease drawer
Heavy-duty reinforced control knobs
Push-button piezo ignition
Adjustable feel and 2 additional rollers
Easy clean, installation and service
Temperature range: 90-300°C
Gas rating:31kW
1200mm x 812mm x 485mm
One year parts and labour warranty

Thermostat maintains selected temperature during peak hours
Four separately controlled burners
Each griddle burner is rated at 30,000 BTU (9KW)
Aeration baffles between burners spread the heat evenly across the entire griddle surface
Burners are located every 12” (305 mm)
Each burner has an adjustable gas valve and continuous pilot for instant ignition
Highly polished 1” (25 mm) thick steel plate holds temperature and has a quick recovery
Full 24” (610 mm) plate depth for more cooking surface
Surface is ideal for a large range of menu items
Stainless steel grease gutter is 4” (102 mm) wide
Large 1 gal (3.8 L) capacity grease can has a weep hole to indicate when full
Stainless steel front, sides, splash guard, and ledge
Stainless steel ledge is one piece rolled for cleaning convenience
Control knobs are cast aluminum with a Valox™ heat protection grip
4” (102 mm) stainless steel legs are included
Gas Rating 35kW (120,000 BTU)
1219m x 822mm x 356mm
One year parts and labour warranty

Image shows smaller CITG-36 model

Please contact us for pricing on Imperial Equipment