Hand Wash Basins

Polycarbonate wash hand basin, complete with drain boss and WRAS 3" lever taps
Replaces stainless steel wash hand basins with lower carbon footprint
Engineered from a single-piece, moulded, high-grade polycarbonate ABS grey plastic
The BaSix WS1 is ergonomic, attractive, strong, durable and has no sharp edges
SaniTru® antimicrobial additive embedded in the basin material itself resists build up of mould, mildew and grime to provide a cleaner surface that's easier to clean and lasts the life of the product
Manufactured by Mechline in the UK, the new polycarbonate moulded hand basin is a brilliant innovation, saving time on installation, saving money and helping the planet!
Compared with stainless steel basins, the WS1 is just as tough but easier to install and keep clean
Bowl size: 240mm x 110mm x 135mm
305mm x 270mm x 140mm

Polycarbonate wash hand basin, complete with drain boss and single lever mixer tap
Replaces stainless steel wash hand basins with lower carbon footprint
Engineered from a single-piece, moulded, high-grade polycarbonate ABS grey plastic
The BaSix WS1 is ergonomic, attractive, strong, durable and has no sharp edges
SaniTru® antimicrobial additive embedded in the basin material itself resists build up of mould, mildew and grime to provide a cleaner surface that's easier to clean and lasts the life of the product
Manufactured by Mechline in the UK, the new polycarbonate moulded hand basin is a brilliant innovation, saving time on installation, saving money and helping the planet!
Compared with stainless steel basins, the WS1 is just as tough but easier to install and keep clean
Bowl size: 240mm x 110mm x 135mm
305mm x 270mm x 140mm

Full stainless steel construction
Complete with waste, plug
Taps available below
305mm x 2700mm x 140mm

Stainless steel (304) hand wash basin
Supplied with drain boss and your choice of taps
Bowl size: 240mm x 110mm x 135mm
305mm x 270mm x 140mm

Constructed from easy to clean stainless steel
Tap location - accepts 12mm pillar taps (not supplied)
Waste outlet, plug, chain and overflow
105mm deep bowl
400mm x 350mm x 105mm

Stainless steel (304) hand wash basin
Supplied with drain boss and your choice of taps
Bowl size: 300mm diameter x 130mm
380mm x 330mm x 135mm

In addition to the models shown below this sink is also available with knee operated, infra red and lever operated taps, please contact us for further details of these models

Stainless Steel (304) Wash Hand Station
Complete with basin, drain boss and knee operated tap
Easy push front panel for hand free operation
Bowl size: 260mm diameter x 150mm
300mm x 320mm x 195mm

This model is available with infra red or standard taps, please contact us for further details.

Full stainless steel construction
Operated by simple knee push
Designed to reduce contamination
Complete with waste, plug and tap
Bowl size: 410mm x 330mm x 130mm
480mm x 350mm x 560mm

Stainless Steel (304) Wash Hand Station
Complete with basin, splashback & your choice of taps:
KVS: Hand free 'push front' with swivel tap
NT: Delabie Tempomatic 3 Battery Infra Red Tap
NT4: Delabie Tempomatic 4 Battery Infra Red Tap
Pre-mixer valve
Bowl size: 360mm x 270mm x 100mm
420mm x 375mm x 570mm

The foot-operated unit does not require water or mains electricity to operate, ensuring easy placement anywhere around your premises
Designed to hold up to 5 litres of sanitiser gel
Large capacity reduces how frequently the sanitiser gel needs to be refilled, freeing up staff to concentrate on other jobs
Tap dispenses gel via foot press action, ensuring hygienic operation, with no need for hand contact
Designed for indoor or outdoor use
Handles make it quick and easy to move the sanitising station
Constructed from robust, durable and hygienic stainless steel, making it ideal for use in high traffic areas, and easy to wipe clean
Storage cupboard for additional 5 litre bottle
For security, the station has a tethering point and cupboard for housing the sanitising gel
Attached A4 clip frame allows easy customisation with your own message or logos
Not supplied with hand sanitising gel
250mm x 369mm x 1294mm

The foot-operated unit does not require water or mains electricity to operate, ensuring easy placement anywhere around your premises
Designed to hold up to 5 litres of sanitiser gel
Reduced 700 mm height - easy for children to reach the dispenser
Large capacity reduces how frequently the sanitiser gel needs to be refilled, freeing up staff to concentrate on other jobs
Tap dispenses gel via foot press action, ensuring hygienic operation, with no need for hand contact
Designed for indoor or outdoor use
Handles make it quick and easy to move the sanitising station
Constructed from robust, durable and hygienic stainless steel, making it ideal for use in high traffic areas, and easy to wipe clean
Storage cupboard for additional 5 litre bottle
For security, the station has a tethering point and cupboard for housing the sanitising gel
Attached A4 clip frame allows easy customisation with your own message or logos
Not supplied with hand sanitising gel
250mm x 369mm x 1074mm

Provides hand washing facility in locations where mains water and electricity aren't available
Ideal for increasing hygienic hand washing facilities wherever required - just fill and go
20 litres per fill, dispenses up to 100ml per foot press, delivering 200 dispenses from one full tank
Foot operated dispenser to also control the volume of water needed
Tap dispenses water via foot action - ensures hygienic operation, with no need for hand contact
Internal waste collection - no need for drainage
Refill and waste front accessible, once in position there is no need to move unit
Large wheels and handle make hand wash station quick and easy to move
Constructed from sturdy and hygienic stainless steel, including handy accessories, making it easy to wipe clean
Supplied with splashback and space for a soap dispenser and paper towels, for easy and convenient access to soap and towels
Emprty weight: 27.4kg
Height to sink: 915mm
514mm x 543mm x 1220mm

Reduced 700 mm height - easy for children to reach the sink
Provides hand washing facility in locations where mains water and electricity aren't available
Ideal for increasing hygienic hand washing facilities wherever required - just fill and go
20 litres per fill, dispenses up to 100ml per foot press, delivering 200 dispenses from one full tank
Foot operated dispenser to also control the volume of water needed
Tap dispenses water via foot action - ensures hygienic operation, with no need for hand contact
Internal waste collection - no need for drainage
Refill and waste front accessible, once in position there is no need to move unit
Large wheels and handle make hand wash station quick and easy to move
Constructed from sturdy and hygienic stainless steel, including handy accessories, making it easy to wipe clean
Supplied with splashback and space for a soap dispenser and paper towels, for easy and convenient access to soap and towels
Emprty weight: 24kg
Height to sink: 700mm
520mm x 592mm x 1003mm

High quality stainless steel construction
Designed for outdoor catering applications
Foot operated pump activates tap
Waste water tank empties easily
Rear wheels and handle for easy manoeuvrability
Boil dry protection
Temperature range: 42°C
Capacity: 25 litres
Electrical loading: 3kW 13A 230V~
450mm x 600mm x 900mm

Image shown with optional extras available below

Provides hand washing facility in locations where mains water isn't available
Ideal for increasing hygienic hand washing facilities wherever required - just fill, plug in and go
Provides 85 hand washes - 10 litres per fill
Internal waste collection - no need for drainage
Water temperature limited to 42°C for user safety.
Foot-activated, infrared-operated tap make unit hygienic, with no need for hand contact
Large wheels make hand wash station quick and easy to move
Constructed from sturdy and hygienic stainless steel, including handy accessories, making it easy to wipe clean
Includes soap and paper towel holder and splashback
Weight: 32kg empty
Height to sink: 900mm
450mm x 543mm x 1250mm

Tap dispenses warm running water via foot action, ensures hygienic operation, with no need for hand contact
Foot operated dispenser also controls the volume needed
Provides 20 litres per fill, dispenses up to 100ml per foot press, delivering 200 dispenses from one full tank
Internal waste collection
Standalone and can be placed wherever needed, totally independent of plumbing, as it holds a 20-litre supply of water and a separate waste collection
Top fill - easy access for refilling without the need to remove panels
Trough style sink allows more space for people to wash their hands, whilst keeping the top of the unit cleaner for longer, without the usual water splashes everywhere
Power optional - can be used as ambient dispense where no power source is available, or warm water not required
With built in splashback, with soap and paper towel holder accessory
Temperature limited to 42°C for safety
Large wheels for easy manoeuvring
Empty weight: 33.6kg
Height to sink: 915mm
515mm x 543mm x 1220mm